 |
|
 |
|
Leopard c2
Photo credit: Swiss Army
|
Leopards II
SALH soldiers are currently training on the newest tank the Leopard II in service within Afghanistan
The combat weight of the Leopard 2 is 55,000 kg, empty weight being 52,000 kg, and its hull has spaced multi-layer armor. The running gear consists of seven dual rubber-tyred road wheels and four return rollers per side, with the idler wheel at the front and drive sprocket at the rear.
Torsion bar suspension is employed, with advanced friction dampers provided. The Diehl 570F tracks, with rubber-bashed end connectors, have removable rubber pads and use 82 links on each track. For use in icy ground, up to 18 rubber pads can be replaced by the same number of grousers, which are stored in the vehicle's bow when not in use. The first four sessions of the side skirts are heavily armored, and must be raised for rail transport. The remaining sessions are made of standard rubber and metal fabric and are hinged to swing upward if neccessary.
The driver's station is located at the front, offset to the right of the vehicle's center line. A large, pintle-mounted lift-and-swing type hatch is provided for the driver and opens to the right. There are two observation periscopes in the driver's hatch, plus one to the left of his section, for use when driving closed down. The central periscope (in the hatch) can be exchanged for a passive IR-sight for night operations. An escape hatch is provided under the driver's seat.
The turret, incorporating multi layer armor, is mounted in the center of the hull and is manned by the commander and gunner in the right half, with the loader in the left half. The commander and the loader each have a circular hatch, opening to the rear, and six periscopes provide all-round vision for the commander. Both hatches have ring mounts for the 7.62 mm MG-3 air defense machine gun, though it is normally installed on the loader's hatch.
Armament:
The 120 mm Rheinmetall main gun is fully stabilized in both azimuth and elevation, and the WNA-H22 electro-hidraulic gun control system is fitted. The gun fires two types of ammunition, both developed by Rheinmetall APFSDS-T, known as DM-33 KE (Kinetische Energy), and HEAT-MP-T, known as DM-12 MZ (Mehrzweck = multipurpose), both types having combustible cases. 27 rounds of 120 mm ammunition are stored in a special magazine in the forward section of the hull, to the left of the driver's station - additional 15 (making a total of 42) are stored in the left side of the turret bustle, and separated from the fighting compartment by an electrically operated door. Should the ammunition in the bustle be hit, blow-off panels in the turret roof would direct any explosion upwards. A co-axial 7.620mm MG 3is mounted to the left of the main gun and 4,750 rounds of machine gun ammunition are carried.
|
|
 |
